Patchwork ruler stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
It's a stand made for rulers. The slots are 5 mm wide. The whole thing is 40 cm wide, 16 cm deep and 2.5 cm tall.
Needs to be printed in 2 parts, and then it can be joined using 2 M4x20 bolts and 2 M4 nuts.
there are also feet, I printed them out of TPU. They cover the bolts and prevent slipping. Requires approx. 500g of filament with 15% infill.
Files:
Ruler_stand.stl is the whole thing in case you can fit it on your bed.
Ruler_stand_A/B is the stand split in 2 20cm wide parts.
Feet_long and feet_round are feet meant to be printed in TPU. You will need 4 of each. But 4 round and 2 long will do, if you struggle with TPU like I do.