Rotating filament holder for Neptune 4/4pro printer.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Suitable for spools with inner bore diameter 35-75 mm and width up to 85 mm.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Rotating filament spool holder for Neptune 4/4pro printer. Suitable for spools with inner bore diameter 35-75 mm and width up to 85 mm.
To make it you need: bearing 608 - 2 pcs, nuts m8 - 3 pcs, washer m8 - 2 pcs, stud m8 135 mm long.
Print 3 parts. The parts are designed with nominal thread and hole sizes. When cutting the parts it is necessary to take XY axis compensation - to obtain the real dimensions (depends on the material used and printing parameters). When printing “Screw part 2” use compensation of internal hole size (I used +0,4). The ease of rotation of the holder can be adjusted by different tightening of the nut between the rotating part and the fixed part.
I printed from Petg, 4 layers, 30% gyroid fill.