1 / 1
BMR1 Vivo Monitor Arm Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp the Drop BMR1 to your vivo monitor arm's vertical pole.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 733
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The clamps use 2 M3x16mm bolt and nuts each as well as the original bolt from the BMR1 stand to mount the speaker to the arm.
There are attempts at cable management on the backside of the arm but are a bit of a pain to print and cleanup and would likely be removed if I ever made a revision to the model.