Hogwarts Express 9 ¾ Train Station Clock

My daughter is a big Harry Potter fan and has a collection of their book and movie themed items. I designed these Hogwarts Express 9 ¾ Train Station Clock models in 2 different sizes for her as a Christmas present. The larger clock fills the Plate of most printers at 195mm x 233mm in size. The larger clock is a perfect size for a wall clock. The smaller clock is 138mm x 165mm and can be used as a wall clock but the size is better suited as a desk or shelf clock.

The models do require use of an MMU or AMS for multi color print. I printed using PLA colors Red, Beige and Black. White could be substituted for beige, but I preferred the off white or beige versus pure white for the clock. I also used Sunlu's Pure Yellow as my fourth color. I like Sunlu's darker shade of yellow provided by their Pure Yellow compared to other manufacturer's lighter brighter yellow. Bambu's new Sunflower Yellow would be another excellent choice but wasn't available when I printed these. 

The model does take supports to print. I had the choice of multiple glue together pieces with very little or no supports or a single piece solution with much more supports. I opted for the single piece solution.

The printed hour and minute hands are optional. Some clock movements come with their own decorative hands that you may choose to use. As I have found, there are different shaft diameters (clock hand hole opening) and the ones I've included may not work on your clock movement. They worked with two of the clock movements I had and not the third.

There are numerous clock modules available to purchase.  The size of the clock is standard however the shaft lengths and diameters vary from vendor to vendor.  I designed for a 56mm x 56 mm (6.1" x 6.1")  16 mm thick clock movement readily available via Amazon from numerous vendors. The design accommodates a brass threaded shaft diameter of 7.5 mm (0.29"). The brass portion of the shaft needs to be 8.5mm in length or greater. For my photos, I used an 11.7mm brass shaft length. The following Amazon Clock Movements are just a few that will work:

TIKROUND Youngtown 12888 Quartz DIY Wall Clock Movement 3/8" or 7/16" thread length.
https://www.amazon.com/Youngtown-Movement-Mechanism-Replacement-Thickness/dp/B01LWN22B6/ref=sr_1_3_sspa?sr=8-3-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&smid=AMQRD6S0N37R0

https://www.amazon.com/Youngtown-Movement-Mechanism-Replacement-Thickness/dp/B09T2BQS4X/ref=sr_1_3_sspa?sr=8-3-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&smid=AMQRD6S0N37R0

Solwotin Clock mechanism with 16.5mm overall shaft length
https://www.amazon.com/suiwotin-Mechanism-Replacement-16-5mm-Movement/dp/B0DB5M7V47/ref=sr_1_1_sspa?sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY

Use only the brass nut and not the brass washer or rubber spacer as these are not needed and will cover some of the clock graphics.