Nomai Translator [Outer Wilds]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replica of the Nomai translator tool from the game `Outer Wilds`.
- Ocena
- 0 / 5
- Polubienia
- 56
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 3550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replica of the Nomai translator tool from the game `Outer Wilds`. It's assembled from a mix of built-in threaded sections, friction fit slots, pegs, and glue. It's a big project and I'm not yet willing to provide in-depth documentation, so beware.
Things you'll need outside of what is printable include:
- 3 toggle switches
- 1 potentiometer
- an Arduino (or compatible micro-controller. I used an esp32 board).
- A small stepper motor and driver (for the spinning reel).
- A printed piece of cardstock for the screen (file to print is provided Via PDF. I laminated mine for a more genuine effect).
- A length of ethernet cable for the cable exiting the camera.
- 2 M5 screws for attaching the camera module.
- Various small screws for decoration.
- Various electronics include LED tape for the screen backlight, 5mm LEDs for the camera, various resistors, and wire.
I chose to design mine to work with 9v which drives my 12v LED tape well and can be run for about an hour on a 9v battery (The stepper motor is power-hungry). You can run yours however you like.
That's about it! Have fun.