Modular toolholder for Festool MFT, 3 positions possible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various elements can be fixed to this toolholder, three positions can be choosen: horizontal, vertikal up or down
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This toolholder can be fixed to the rail of the MFT workbench using the standard MFT nuts and M5 nuts and bolts. The two outer parts are fixed on the rail, the middle part is movable and can be brought into three positions: horizontal, vertical up or vertical down. Any element to hold tools can be fixed with help of a 20mm screw and nut.
Three elements are shown: a box for pencils, scissors, screwdrivers etc, a ringholder for larger tools, and a board with holes (which would need two holders for stability) to which several elements may be fixed.
You can design you own elements, you just need a 20mm hole for attaching.
I have tested the functionality of the movable part (see photo) , but didn't print everything so far, as I do not possess such a workbench and didn't want to produce waste. Gcode is not included because PLA probably isn't what one should use to achieve optimal stability. (Usually ABS is used for sich parts.)
I used Fusion for the design.