Awesome Birdhouse and Bird Cabin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D printed birdhouse with all the proper opening, ventilation and other requirements
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 120
- Wydruki
- 1
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I wanted to give myself another design challenge with Tinkercad. Here are two different sized bird dwellings - thee Birdhouse and Bird Cabin. I printed mine with wood filled PLA so it can be painted.
I also printed it at 0.32mm layer height with a 0.6 nozzle to reduce print time and increase strength. The included .3mf file shows the settings I used. The build plate temp. is set at 70°C to mitigate the corners lifting - it works. Although I printed it on my Prusa XL, this can be printed with smaller printers.
I highly recommend you use a non odor, strong adhesive to connect roof to house. CT (Super, Monster, etc.) glue may not be enough to withstand nature and epoxy is too smelly. This is a great product I've used on cosplay weapons.
www.walmart.ca/en/ip/j-b-weld-plasticbonder-syringe-25ml-black/6000197582095
Personal use only.*
Digital formats of this model may NOT be shared.
*Only members of my Tier 2 Printables Club may sell 3D prints of this mode.
Follow me on:
Instagram.com/ozzy_artist
Printables.com
www.facebook.com/profile.php?id=100082036420297
Twitter: @Ozzy_The_Artist
Your support through my Printables Club would also be appreciated :o)