poop shoot for p1s
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an updated model of my old design, with a larger size to accommodate the increased waste from the AMS.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 695
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an updated model of my previous design, now larger to handle all the filament waste from the AMS.
Instructions:
• Use 15mm screws for assembly.
• Utilize the split tool in bambu studio, to print it in 3 pieces.
• Glue the parts together for a sturdy build.
use the conector tool i bambu studio to get the “studs” for align the parts when glueing!
The setup is designed to hang above the printer, as my printer is positioned on the side of the bench, with the filament waste channel hanging neatly beside it.
Glue it all together, and enjoy a cleaner workspace! 😊