SV08 Vibration Damping Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Sovol SV08 has four hard rubber feet that aren't particularly good at damping vibration so I made some pads.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
The Sovol SV08has four hard rubber feet that aren't particularly good at damping vibration so I made some pads that can be placed underneath the SV08 feet with no tools needed and no modification to the printer. The pads raise the SV08 15 mm to increase cooling airflow underneath the printer for the electronics, reduce the vibration and noise transferred from the printer, and create a much more skid resistant footing.
I included the FreeCAD file if you'd like to modify the part, the STL if you want to use your own slicer, the OrcaCAD file if you'd like to slice it a bit differently or array all four feet to print in a single job (sequentially to avoid TPU stringing between the feet), and I tried to upload the G code file so you could download and print the part directly on your SV08 printer but Printables didn't like the G code, reporting “File contains unsupported code EXCLUDE_OBJECT_DEFINE”. The SV08 specific G Code is on my Thingiverse account.
If you slice the STL yourself, you'll need a modifier cylinder to put a 2 mm solid cup on the inner pad and make the rest of the inner cylindrical pad 7% gyroid infill with no outer wall layers. That's what makes the shock absorbing foam pad.
Print Settings
Printer Brand:
Sovol SV08
Rafts:
No
**Supports:**
No
Resolution:
0.4 mm nozzle, 0.4 mm first layer, 0.2 mm layers
**Infill:**
2 wall thickness, 7% gyroid infill in the inner pad
Filament: Any 95A durometer TPU
Category: 3D Printer Accessories