Customizable anti-slip tension [shower] curtain rod pole end (OpenSCAD) (parametric SCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This anti-slip pole-end resolves the problem of slipping tension curtain poles on gypsum-board walls.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This anti-slip pole-end resolves the problem of slipping tension curtain poles (like this one on Amazon) on gypsum-board walls.
To work properly, an M5-15mm screw extends up to 5mm into the wall to form and fill a divot in the wall.
This means that it will put a shallow hole in your wall! That is what will keep the pole up instead of plain friction.
It also means that this device works with "soft" walls like gypsum board -- not hard tile!
After use, you will need to fill or patch the hole with plaster or other filling substance.
SCAD file included. Customizable for different pole-end diameters.
Source code at: [email protected]:geru/3d-scad-poleEnd.git
3D models at: https://www.printables.com/@hkern0
Author website: https://hkern0.com