Components box for The Gamma - A Print in Place RC Car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really like the Gamma - A Print in Place RC Car, but I have a goal of getting more organized, that's why I made a…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I really like the Gamma - A Print in Place RC Car, but I have a goal of getting more organized, that's why I made a component box for it. It neatly houses the Tamiya RC controller, Servo, batteries and the ESC. You'll need 4x M3 8mm screws, and optionally nuts, as well as a drill to make these holes in the Gamma Car. This version is for Long, Full (the solid bottom). I used counter-sunk screws.
Be sure to use WD-40 on steering.
Print on 0.4 nozzle, as 0.6 would butcher the thin walls.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.2
Infill:
15
Filament:
Hobbyking PLA blue
Category: R/C Vehicles