sgikbd Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the SGI PS/2 keyboard and mouse converter
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I wasn't satisfied with the 3D printable shell supplied in the sgikbd repo, so I made my own.
Parts needed:
8x 3x8mm Screws
4x (Paper) Washers
The PCB gets screwed into the bottom of the case with 4 screws and 4 washers.
Then the Case is held together with 4 more screws on the sides.
You might be able to go without the internal screws if you don't mind the PCB rattling around a bit. The tolerances are tight enough that this won't cause any functional issues.
There are 3 versions of the top shell available:
- sgikbd_case_top_mmu: The icons are part of the model and can be printed in a different color on any printer that supports it.
- sgikbd_case_top_inset: The icons are inset into the plastic by 0.6mm. Only one color needed.
- sgikbd_case_top_noicon: There are no icons.
When printing one of the top shells with icons, make sure to enable ‘detect thin walls’ in your slicer.