Camera Mount for Prusa MK3/4/4S with Cable management features
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camera Mount for Prusa MK3/4/4S with Cable management features. Remixed Model. Original model by JSund.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Printed part settings:
0.2mm layer height.
Nozzle size 0.4mm.
Infill 15%.
Brim might be required for thin “Claw” feature as mine peeled up on the first print attempt. I just squished the part into the bed slightly more than normal to get around this issue.
Attach the camera first. Camera mounting you can use a ¼" bolt that will screw through the printed bracket at into the camera as seen in the pictures.
Bracket attaches to the aluminium extrusion at the front of the printer as seen by JSund's pictures of the original model.