Clas Ohlson Langpanne 44-4779 Håndtak
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement handle for the Clas Ohlson kake-carrier (langpanne). The pin in the hinge is the first thing that breaks.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- GNU General Public License v3.0
Description
This is a replacement for the handles of the Clas Ohlson kake carrier 44-4779. These handles easily brake and usually cannot be replaced - unless you have a 3d printer, of course.
It's worth considering printing this in PETG or something even more flexible.
The print that most likely broke and causes you to use this template has been supported with an extra tiny beam to give a bit more strength. Anyway: the challenge will not to print this item, but to put it in place into the lock. Good luck with that.
- PETG
- 0.2 mm layer height
- 0.4 mm nozzle