1 / 2
Harvey Big Eye Extrusion 4mm Hex Key Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This plugs into the square extrusion hole on a Harvey Big Eye and is designed to hold the associate 4mm hex key.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A member of a group to which I belonged asked someone to design a hex key holder that would fit in the square extrusion slot on his Big Eye fence. This is a prototype, and as soon as it's refined, I'll upload a final. 2025-01-03
2025-01-03 v2 - Original model had .15mm clearance on the sides. A test print by the requester revealed it was a bit loose and needed some masking tape. I've added 2 new files: one with .1mm, another with .05mm. The 4mm key hole was reported to be perfect.