Slimline Sealed Poop Chute for single colour prints
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This poop chute catches waste filament and seals the rear chute to reduce noise and airflow.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wanted a waste filament collector that was small enough to fit within the printer footprint and also seal the waste filament port to reduce noise and air flow. It tucks perfectly behind the stock spool holder and does not obstruct either rear fan vents. I don't plan on printing with multiple colours so its a small storage that will need emptying every 20 or so prints.
This part uses 4 10x2 magnets to attach to the rear panel making it easy to remove and empty.
If you want to achieve and even better seal then adding some foam VHB tape around the upper flange is optional but not required.
Prints easily in PLA with no supports and standard settings
