Dn Pstl - Shortened Dan Pistol
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shortened version of Orion Blaster's Dan Pistol
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 173
- Wydruki
- 2
- Wyświetlenia
- 1315
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Shortened the original Dan Pistol by 50mm overall with a 25mm reduced draw to improve flubbing at low fps. Comfortably hits 100-130fps with small sections of k25 spring and a barrel flush to the shroud.
Length Changes:
Shortened: slide back and front, frame front, trigger, plunger
Catch - combined all into one assembly to reduce the length
Hardware changes - need shorter screws for catch (~1in in length now), one fewer o ring for catch
Manufactured parts changes - shorter bars (197.25mm), shorter threaded rod for plunger (76.6mm), shorter plunger (~2in), shorter spring & barrel
Additional Changes: These parts are compatible with the original version of the blaster
frame left and right- chamfered holes and filleted edges to allow for use without grip cover, stress concentration corner removed
T-pull delete for lower profile