Majora's Mask Woodgrain Flat Back / Embedded Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Majora's Mask model remixed to have flat back and option for embedded magnets
- Ocena
- 5 / 5
- Polubienia
- 449
- Pobrania
- 1205
- Wydruki
- 8
- Wyświetlenia
- 4599
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
There is a version without embedded magnet spots and one with.
(!) If you want to embed magnets, make sure you look up how to add a pause during the slicing process. This varies by slicer. (!)
The current design is for cylindrical magnets, 10mm (diameter) by 5mm (height). There are four spots, but you can just populate two spots if you don't want such a strong magnet.
Make sure you check out the original model in case that's better for your purposes. It's an excellent model; I just wanted a solid version and wanted magnets in it.