Sanding Stick Palette Knife Spool Finisher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The idea here is to load up your bed with a bunch of these when you've got only a small amount of filament left on the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
The idea here is to load up your bed with a bunch of these when you've got only a small amount of filament left on the spool, and run the print as many times as it takes to finish off the spool. I keep a few g-codes with a full bed of these and a half bed, with the amount in grams the prints will take, so I can finish off my spools when they're near their end. I have handfuls of these in a little cubby, ready for any sanding or mixing needs.
I like having these little wedges around for mixing paints and epoxies, or applying spackle or sandable filler, I also trace around them on scrap sheets of sandpaper, cut them out the pattern, the glue or double-side tape the sandpaper to the plastic for a small sanding stick with a cornered end and a rounded end.
Anyways, a fellow r/3dprinting subscriber requested I post them, so here they are. Enjoy!
Print Settings
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Category: 3D Printer Accessories