1 / 1
Another Remix of T Mobile Gateway Wall Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The mount was not big enough for my T-Mobile gateway, so I embiggened it for the "FAST 5688W" model.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The mount was not big enough for my T-Mobile gateway, so I embiggened it for the "FAST 5688W" model. Printed with 40% infill and fuzzy-walls in PETG. I suggest mounting one side into a stud and the other with a wall anchor. You could probably use less infill, if you modified the area right around the mounting holes to be 40% infill, but the filament savings may not be worth the effort.