Cup holder for utilimaster stepvan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cup holder intended to mount to the top of a square structure.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Designed this to mount to the beam beside the small front window on a utilimaster step van. Currently stuck on with vhb but I added some counter sunk holes for #10 self tapers or other screws if you want to.
Bottom is sloped at 22.5 degrees so it should print without supports on even poorly tuned printers without collapsing. Hole in the middle for drainage.
3.375in at the top and 3in at the bottom with 2.9in depth to fit my favorite cup.
Fits mcdonalds and most other cups as well but wont fit large water bottles.
I liked the curvy organic shape on the outside, no particular reason for it.