Creaking Articulated
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Creaking from Minecraft with articulated joints.
- Ocena
- 3 / 5
- Polubienia
- 20
- Pobrania
- 210
- Wydruki
- 0
- Wyświetlenia
- 1467
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
THE MODELS I PRINTED ARE AT 250% SCALE. BEWARE THE TINY PRINT.
This is a model of a creaking that I designed myself. I recommend any filament that can slightly bend, as the left leg goes in with a snap and will break if non-bendable filament is used. The left leg might need a little bit of sanding on the C shape to go in because it's very tight and might break the body if forced in. I may make a MMU file for easy multicolor printing and no painting required. Some parts might go in a little tough, so sandpaper nearby is always a good idea. The left arm is the one with supports needed on BOTH sides, so look out for that. the side with no extrusions to the base shape should face the inside, but that should be easy to know for the 3 limbs that stick off the side of the body. Supports may be needed on some parts, unless your printer can do some crazy overhangs.
NOTE: Everything not black was painted by me. If you want a multicolored Creaking, you may have to redesign my file to be MMU compatible or paint it yourself as well.
(This probably looks like a scam from the cover lol)
(Sorry if the photos I took are garbage)