1 / 2
More sturdy railing "With Pins" for "Tower for Patrollers with Paws" by @kth0
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Merged more sturdy rail from @FuncPrintGuy_175668 with the original rail from @kth0
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 204
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Merged more sturdy rail from @FuncPrintGuy_175668 with the original rail from @kth0.
Liked the more sturdy rail but wanted the pins for assembly.
Print settings don't really matter for this one but here's what I used:
Print Upside down
PLA
0.2mm layer height
10% cubic infill
2 perimeters, 3 solid top and bottom layers