1 / 8
ProtoXtruder Back plate mount for HGX-lite gear kit (Back_HGX.stl) — zdjęcie 1
1 / 8

ProtoXtruder Back plate mount for HGX-lite gear kit (Back_HGX.stl)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

ProtoXtruder Back plate mount for HGX-lite gear kit (Back_HGX.stl)

Ocena
0 / 5
Polubienia
10
Pobrania
51
Wydruki
0
Wyświetlenia
626
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I wanted something compatible with my Voron 0.1, as I had cables already pulled, and crimped.  I am not ready to convert it over to the newer carriage for the V0.2.

I used the supplied design files from nhchiu@nhchiu and used the same style of support to create horizontal mounts for EBB36, or cable managements.

Files:
-BackBoardMount6mm.stl
-BackBoardMount7mm.stl
-Spacer20mm.stl (vary the z height for your needs)

Required
2 x M3 heatset inserts either 5mm or 6mm deep depending on the model printed.

Tagi