3V LED lamp "Multiplication Table"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The small lamp is powered by a 3-volt battery. The lamp is made in the form of a multiplication tab
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 443
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Math
- Licencja
- Creative Commons — Attribution — Share Alike
Adding Supplies
- COB LED Strip 3V, 120mm
- Battery CR2032
- (optional) superglue or hot glue
Print Settings:
| Filament | PLA, PETG |
| Layer Height | 0.2 mm or less |
| Wall loops | at least 3 |
| Infill | 20%, grid |
| Top\Bottom shell | 3 |
| Supports | None |
| Brim | As needed (depends on bed adhesion) |
Assembly guide:
Step 1:
Gently bend the contacts into the hook shape of the LED strip and insert it into the lock.
Step 2:
Insert the lock into the top lid.
Step 3:
Check the operation of the LED strip.
Step 4:
Connect the top lid, table and multiplier bar.
Step 5:
At the bottom, hook the LED ribbon with a hook.
Step 6:
Thread the hook through the bottom lid and join everything together, you can drop a little glue if necessary. After that, cut off the excess part of the hook.
Done!