Gridfinity Tray for Magnetic Tools (Parkside, Lidl)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I completely redid my earlier tray from scratch, since I discarded the LED-light tool from Parkside in this kit.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 520
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I did not like the blister packaging. Since I use more and more gridfinity solutions I created this tray for Parkside inspection and “third-hand” tools. The LED-lamp was scrap, so I discarded this in my waste bin.
In this post you find several STL-files:
- Suitable Parkside tray with gridfinity 3x6 (above cut-off) for the complete kit.
- Suitable Parkside tray with gridfinity 2x6 (above cut-off) for the magnet and mirror tool incl. 2 clips
- …with and without finger-moulds…
- Gridfinity 3x6 tray for your own experience, cut out your tools as appropriate.
- Gridfinity 2x6 tray for your own experience, cut out your tools as appropriate.
- Individual cut-out tools for Parkside Set:
- Mirror
- LED lamp
- Magnet
- Clip
Printed on my BambuLab X1C as tray 251.5mm long, which exceeds my Prusa machines. 0.2mm LH with variable layer height feature, 2 perimeters. Printed with Geeetech PLA in grey, top3 layers in dark grey. Just insert a “Pause” for changing filament.
Check out my gridfinity ruler: https://www.printables.com/model/1129562-gridfinity-ruler-56-grids
Explore my other Printables: https://www.printables.com/de/@Tritschi