10x 18650 Battery holder/case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A battery holder for up to 10 18650 cells.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 285
- Wydruki
- 5
- Wyświetlenia
- 1264
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I always lose track of my 18650 cells so I decided to design a case for them. This is my first major print on my i3 MK3S+, and my first print I've published online. I'm sure there are plenty of battery holders around but hopefully someone will find this one appealing.
| Capacity | 10 x 18650 cells | |
| Height | ||
| Base | 52mm | |
| Cover/lid | 24mm | |
| Total (with cover) | 72mm | |
| Width | 130.5mm | |
| Depth | 49.5mm 47mm excluding text | |
| Recommendations | ||
| Filament | PLA or any of its regular substitutes. | |
| Layer height | 0.2mm or below (I used 0.1mm in my photos). | |
I wish I had some clear filament to try printing the cover with. I've included a version of the cover with a slight bevel on the top. I designed this model in Blender. I know traditional CAD programs are probably a lot better suited to practical prints, but Blender is where I am most comfortable right now.