1 / 1
Fillement Rack Stand — zdjęcie 1

Fillement Rack Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple to make fillement rack just need some round tube can be wood or metal.

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
148
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Before printing the model i would highly recomend printing the test modle first to make sure your tube will fit the hole.

The diamiter of the hole is 25.265mm. i have included the freecad file i used to create it so that it can be change easily.

To make the unit print 4 of the brackets off and then just insert the tubes and it should be good to go. i didnt use any glue or tape to hold the tubes in but if needed you can. 

Tagi