Info Orbs Case for the official PCB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A housing for Info Orbs
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A housing for the Info Orbs PCB.
You need:
6x M3x12 (These go into the holes with the red circles and hold the housing in place)
12x M3x6 (Six for the front and the other six for the lid on the back)
I used three 6x6x5 push buttons.
The cover for the back is only for a usb cable connected directly to the esp32. if someone has connected the USB C power breakout board, please send me the exact dimensions and I will create it.
Assembly:
Before the circuit board is inserted into the housing, the button extensions must be inserted. The rest should be self-explanatory. Otherwise just ask! :)
You can find the project at: https://github.com/brettdottech/info-orbs
Thanks to brett.tech for the great project! :)