Micro Cargo Bike Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small cargo bike (Omnium Style) as a toy for kids.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
A small toy cargo bike. Inspired by the wooden one by Adeline O'Moreau. Looks like a small Omnium bike :-)
The design is based around a 0.2mm tolerance. I printed everything in PLA.
Print each file once, except for the pins. You need two of each type (I printed them with 100% infill). The fork has to be rotated 108 degrees in your slicer, couldn't figure out how to add that in CAD.
Assembly should be pretty straight forward, just glue the pieces together. You can add some rubberbands to the rack so the cargo stays on the bike ;-)
The photo is of my V1, I made some changes since then which are not tested yet. If something doesn't fit, let me know.