1 / 8
HPI Venture 1:10 - Chassis Parts / Electronic Plate / RCRUN LC80 Body Mount / Etc
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some parts for the underrated HPI Crawler Chassis.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
General Description:
- L and R mean left and right. Most parts are available for both sides; if not, they must be mirrored in the slicer.
- Unfortunately, I sold the Venture, so there won't be any more parts. Maybe the ones here can help someone.
Parts Description: Electronic Plate / Floor Pans / Side Plate
- For the other side, please mirror it in the slicer.
- Use the existing holes in the rails and use 2mm longer screws.
Parts Discription: RCRUN Toyota LC80 Magnetic Body Mount
- Electronics plate / floor board for the HPI Venture Chassis needed.
- 12 pieces. 15x3 mm neodymagnet required (with hole for countersunk screw).
- It is best to print the body holder in ABS and connect it to the body with ABS glue as shown in the picture.
- The magnets are glued into the body holder and screwed to the electronics plate with M3 countersunk screws.
Parts Discription: RCRUN LC80 Front Steel Bumper Adapter
- Adapter to mount the original RCRUN LC80 bumper on the HPI Venture.