Pari 37.60 Front replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The front of our Pari 37.60 was broken after it fell off the couch. It should be the version from the 1980ies.Both…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The front of our Pari 37.60 was broken after it fell off the couch. It should be the version from the 1980ies.
Both covers (Deckel) are glued in position. I used "UHU Hart Kunststoff" and it took several days until it completly vaporized. Keep in mind to orientate the cover over the air outlet 20 degree angeled. Supports only touching the baseplate otherhwise the small holes are blocked. I printed the cover for the filter on the side because I did not managed to peel off the supports at the first try.
Print Settings
Printer Brand:
Anycubic
Printer:
i3 Mega
No
Supports:
Yes
0,2
Infill:
20%
Category: Replacement Parts