Canton Speaker MX wall and ceiling mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount:2x Mushroom headed screws m4x402x wing nut m42x screws to fix the mount to the wallCeiling mount:3x…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 558
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount: 2x Mushroom headed screws m4x40 2x wing nut m4 2x screws to fix the mount to the wall
Ceiling mount: 3x Mushroom headed screws m4x40 3x wing nut m4 1x M6x 25 allen key screw 1x m6 hexagon nut 2x screws to fix the mount to the ceiling
I used a 25x1 mm steel pipe which was left from a proken pavilion. The platform itself was printed in a different material ehich is the reason for the differend color. Everything can be printed without supports. STEPS of the assemblys are included
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
No
Supports:
No
0,2
Infill:
20
Category: 3D Printing