Creality Nebula Camera Mount (Ender 3 V3 KE) V2.0

Intro

Welcome to my second revision of the original camera mount by myself, the Creality Ender 3 V3 KE Nebula Camera front facing bed mount.

This time it is:

• stronger (slightly more thicker)
• has magnet slots to help hold it in place
• improved bridges to keep the tension against the camera
• positional slots so you can move the camera up or down between small and larger prints
• improved camera clip for those using rubber stand-offs

N.B I have removed my plate to show you how to attach the arms under the hotbed, YOU DO NOT NEED TO DO THIS AND IS FOR DEMOSTRATION PURPOSES ONLY.

Installation

Install the arms in 10 simple steps or less.

1. install your magnets into the slots in the arms (you will need 4 in total, 10*3) (optional)
2. slide the arms under the hot bed at an right angle, starting from the corners aim for the middle
3. push the hotbed between the end of the arms
4. slide the arm into position so its facing straight at you, the little wedge should sit on the remainder of the hot bed and act as a way to leaver it in place
5. install the camera cable over the arms and into the provided cable clips
6. remove the nebula housing that comes with the camera
7. install the nebular posts into the side of the camera
8. push the clips into the desired slots provided in the arm
9. install the arm bridges in place to provide tension on the camera and keeping the arms straight
10. install the camera guide under the screen (optional)
11. enjoy

Printing Tips

• you need 2x of the arm, nebula post, arm bridge
• When duplicating the arm to your build plate, duplicate and mirror it on the x axis.

External video showing arms installation

Print Settings

Printer Brand:

Creality

Printer:

**Rafts:**

No

Supports:

**Resolution:**

0.2

Infill:

**Filament Material:**

PLA

Notes:

Category: 3D Printer Parts