Hiragana to katakana Flash Tiles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The third set to complete the kana flash tile set
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — Share Alike
These dual-sided flashcard tiles feature hiragana on one side and katakana on the other. Designed to complement my existing hiragana/romanji and katakana/romanji sets, these tiles allow you to practice Japanese script recognition and memorization. This set is also designed for manual filament changes. The full set file is setup for a mk4s with mmu3 but loading just the model and following the below instructions will allow printing on a single material machine.
Slicer settings
for printers without a mmu or equivalent
0.2 layer height
set number of extruders to 2
add the g code m600 to the custom g code section for tool changes
add a wipe tower in the free corner for best results
if using wipe tower enable “No sparse layers” to avoid filament waste
optional , enable ironing from a test on a single tile this made for a nicer top layer and didn't smudge the characters too much, but this doubles the print time (the larger ‘a’ photo shows the effect)
Also see: