Koppla Angled Desk Mount UK
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick 'n dirty mount for an Ikea UK plug Koppla 4-way power adapter.I wanted it mounted on my desk, at a 45 degree…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
A quick 'n dirty mount for an Ikea UK plug Koppla 4-way power adapter.
I wanted it mounted on my desk, at a 45 degree angle, and couldn't find any on Thingiverse, so I quickly made this.
I'm still printing my first one - so it's untested. It is likely that the socket at the non-cable end will be limited with what plugs will fit - big bulky adapters will likely be an issue, the rest of the sockets should be ok though. You'll also need to remove the plug during assembly - in order to feed the flex through the hole in the mount.
The cable end will need supports during printing. The non-cable end doesn't. Designed for use with some QuickSilver 6 x 5/8" screws I had kicking around.
If I find any major issues once I've finished printing it, I'll edit this summary within a week of uploading. Otherwise, here you are, and assume it's fit for purpose.
[UPDATE]
Print came out fine. Uploaded images, works as intended.
Surprisingly sturdy with no flex or movement of the adapter. Printed with some cheap 'n nasty white PETG from amazon.
It could do with some slight cosmetic changes, but it does the job as intended.
Category: Organization