1 / 1
Snow/sand feet for foldable chair with 16 mm dia legs — zdjęcie 1

Snow/sand feet for foldable chair with 16 mm dia legs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Snow/sand feet for chairs with 16 mm diameter legs

Ocena
0 / 5
Polubienia
2
Pobrania
19
Wydruki
0
Wyświetlenia
114
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A friend lost some of the feet of her (Amazon) chair and kept sinking in the soft snow; so made these and they work well.

  • Fit 16 mm diameter legs, check yours (note: different diameter than Helinox or REI chairs)
  • The feet replaced the existing feet (just slid them off and replaced). 
  • The center point provides support on hard ground.
  • The wide brim provides support on soft snow or sand.
  • The folded legs still fit in the storage pouch with these feet. 

Printing recommendations:

  • Print in PETG for water resistance
  • Printed in 0.4 mm nozzle / 0.2 mm layer height
  • Worked fine with 3 layers , 25% fill
  • No support needed

The type of chair these fit on:

Tagi