Hub Cap for Nissan Titan/Armada
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rugged looking hub caps to spice up your Nissan Titan!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 415
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Bolt Pattern: 6x5.5in.
Bolt Circle Diameter: 139.7mm
Hub Cap Outside Diameter: 180mm
I wanted a rugged looking hub cap for the steel wheels on my Nissan Titan. I made this one so that I can insert the colours after the hubcap is painted. I used Duplicolor truck bed liner on the cap to give it the rugged look, which also hides the layer lines well. I suppose plastidip would also do well to hide layer lines, or even a hi-build primer. The lettering and white ring are to be inserted AFTER the hub cap is painted.
I recommend lightly sanding the tops of the lettering followed by some clear coat to give it a nice gloss effect. I made a file where the letters are all attached together, to make the process easier. You could easily paint the lettering and ring to your desired colour before inserting into the hub cap.
Material:
Recommended: ASA, PC, ABS(If coated), PA6(If coated)
Not Recommended: PLA, PETG
This fits the steel rims on my Titan perfectly. However, your steel rims may be slightly different…