1 / 5
[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip — zdjęcie 1
1 / 5

[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just what it says. Bowden PTFE Coupler C-Clip for Flashforge AD5M Runout Sensor.

Ocena
4,895 / 5
Polubienia
520
Pobrania
3715
Wydruki
15
Wyświetlenia
7868
Oceny
19

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor.

OPTION 1 of 3 — Clone of the stock factory clip

PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle. Enjoy.

- - - - - - - -

I used digital calipers to measure and recreate the C-Clip used on both sides of the runout sensor on the Flashforge AD5M because one of mine got sucked into a clip-eating black hole. 

Then I went above and beyond and made two more options for it.  Speaking of the other two options… see below.

  • The 1st option is a clone of the stock factory clip -  THIS LISTING.
  • The 2nd option is this one with the extended handle - CLICK HERE.
  • The 3rd option is a TPU print that tethers to the PTFE tube -  CLICK HERE.