1 / 6
X Y Z Filament Shrinkage Calibration Test
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple but effective shrinkage test for calibrating filament profiles.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 255
- Wydruki
- 1
- Wyświetlenia
- 718
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (29)Powiązane
This is a shrinkage test for calibrating filaments. I use orca slicer, but it should work for others as well. Each end is 100mm apart.
As always if you have any questions just comment below or message me. If you like this model, please consider liking and leaving a review, I would greatly appreciate it :)