1 / 5
Floppy Emu (Big Mess of Wires) Case for A&B — zdjęcie 1
1 / 5

Floppy Emu (Big Mess of Wires) Case for A&B

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Case for Floppy Emu, versions A & B

Ocena
0 / 5
Polubienia
14
Pobrania
87
Wydruki
0
Wyświetlenia
533
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

Case for my Floppy Emulators from Big Mess of Wires, done as a pastiche of Macintosh Platinum to match my SE/30.

Everything pops into place, then hold together with 3mm screws (thread the Case_Top posts to catch them, i used 8mm long screws).

Space on the left side for cable and/or connector (could make smaller if you only have cable). Opening on right side allows both SD and microSD, made to look like a little floppy drive opening. (Would benefit from a couple little sticks of plexi as “light pipes” for the LEDs.)

Tagi