X-Shot Longshot Modified Short Dart Mag Release with Knurled Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modification of NatStroo's X-Shot Longshot mag release with a knurled knob and some other modifications.
- Ocena
- 4,5 / 5
- Polubienia
- 28
- Pobrania
- 115
- Wydruki
- 2
- Wyświetlenia
- 811
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This remix includes 3 main changes:
The knob is now a knurled round knob that takes an M3x25 socket head screw, and should be printed at 0.1mm layer heights or lower in order to resolve the knurls. The knob includes sacrificial bridging in the screw hole, so please be aware of that.
The slide now has a tear drop hole for the M3 screws to thread into as the original would leave flat topped holes, and the spring knub has had its underside adjusted for less post processing.
The slide now includes predesigned supports with a 0.4mm clearance. If you are printing in PET-G, then this should work pretty well and leave a good bottom finish on the slide.