Infill test swatches for troubleshooting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
4,31 € – 5,27 € netto (bez VAT)
Dla pliku: Infill test 3.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 4,79 € netto (środek widełek).
- Masa podana przez autora
- 92 g
- Czas druku podany przez autora
- 3,26 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A full set of test swatches to troubleshoot issues with infill, especially with the Mk4 without a high-flow nozzle
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've been having issues with my Mk4 (not the Mk4S) that doesn't have a high-flow nozzle, with certain filaments that just don't flow enough for the input shaping speeds. I tried using the Infill Swatch set by orax and, while fantastic for reference swatches, were simply too small and printed too slow to duplicate the issues I had with failed prints and infill issues.
So, I generated three 3mf files with open-top boxes that show all 18 infill options available in version 2.9.0 of PrusaSlicer. They're also labeled so I can tell them apart after printing. The 3mf files are set up so that you can choose your usual printing speed and layer height settings, your filament profile, and your infill percentage, and everything else (infill pattern, zero top layers, and text labels) is done through modifiers for simplicity. They're easy to update in the future if more infill patterns are added.
Please note that these files when used properly, will intentionally produce flawed prints. They're designed for troubleshooting, so that I could find out which infill pattern is the least bad for the filaments my printer doesn't like. I sell 3D prints of some of my designs so I wanted to be able to set up gcodes that print reliably no matter what's loaded in the printer.
.3mf files are included, as well as .bgcode files for other Mk4/S users. Please let me know if you have any requests, questions, or feedback!
--
If you like my work and want to support me, please check out my online store or become a patron. Thank you!
--
Licensed for personal use only. Commercial licenses not available for this model. Please do not redistribute this file or any modified derivatives of this file in any way, or sell your own prints made from this file. Thank you.