1 / 3
ESP32Cam Articulated Arm Tukkari fastener
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A corner bracket for Tukkari cases where the ESP32Cam articulated arm can be mounted to.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Corner bracket to replace the standard component from Tukkari in the front left top corner. Elements of the articulated arm can be mounted to the bracket to provide a top down view onto the print bed with the ESP32 camera.
The bracket can be used with the standard printable tightening screws used for the articulated arm. The thread is builtin. Elements of the arm can be combined as preferred.
Best printed in PETG without support.
Needs solid lighting due to the relatively low quality of the ESP32 Cam.