Modular Bathroom Box / Bathroom Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gets rid of chaos in your bathroom. Customizable and remixable.
- Ocena
- 5 / 5
- Polubienia
- 92
- Pobrania
- 350
- Wydruki
- 5
- Wyświetlenia
- 2237
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
What is it?
This is a modular system to sort all the bathroom stuff on top of your bathroom-sink. It consists of a base and many modules that friction-fit into the base. The models are created in a away, that water will not accumulate and the box can dry/drain throughout the day.
Can I print it?
The basic models all can be printed very easily and without supports. I used PLA+ to print, but PETG, ASA etc. will work just fine.
You need no futher tools, just your printer.
How can I create my own modules?
I will add the interface-measurements for the base and the modules in a short while. Until then you can just download the STL-files and get the measurements from there or directly edit them in Fusion.
If you have any feedack or suggestions, feel free to comment or DM me and I will try to keep everything up-to-date.
How are the modules named?
AxB - the Base/Module is A spaces wide and B spaces deep
Base - the base part of the system. You need exactly one.
low/high - height of the module (low=50mm; high=75mm)
cut - base/module is very low in the front for accessibility
sectioned - a standard module with further compartments
special - module for a special item
Thanks for reading and happy printing!