Ultra light Lidfinity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smaller/less filament lidfinity for 12mm tape
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Trying to use less filament on my gridfinity build.
Loved the Gridfinity Ultra Light Bins - Plain Edition by @HuMa, but wasnt happy that the lid version would take some place in the bin ( to support the lid … ) and wanted the ability do put/remove them.
Modificitation :
- Cut the model to 12.8mm to accomodate 12mm tape ( and still have the little cutout to place it right ).
- Cut the “bar” , as i find that it take some place in the bin that could be used to store more.
Using PLA+, they are not so easy to break with normal use. Depending on accurracy, they bend a little.
It work as that for my use. I recommend to print only one as a test print, to see if it do the job for you.
PLA+ used by lid :
1.09g
Print time ( with my X1C ) on normal mode 10% Gyroid :
5m5s