Monster Smart Indoor/Outdoor LED Strip - Mounting Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These brackets allow for sturdy mounting of the Monster LED light strip pictured, available at Wal-Mart, Amazon, etc.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
These brackets allow for sturdy mounting of the Monster LED light strip pictured, available at Wal-Mart, Amazon, etc. The LED strips are very high quality, and I love them, but unfortunately they come with crappy mounting brackets with tiny screws that only allow for mounting horizontally, e.g., .light strip faces you when attached to a wall.
I wanted to install these strips under our bed so I created this bracket to allow for vertical mounting, e.g., strip points down when attached to a wall, but I also included a version similar to the ones provided by Monster, but a lot sturdier and to accommodate for larger screws. I used #8 wood screws to attach these.
recommended filament: PETG (PLA will be too brittle). I printed these using both Elegoo Rapid PETG (Black) and Prusament V0 PETG (Natural).
recommended print settings:
0.4mm nozzle
0.2mm layer height
3 top and bottom layers
2 perimeters (minimum)
50% gyroid infill
no supports
no brim