xTool S1 to Fumeclear FC-2003 exhaust adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts the exhaust of the xTool s1 to the Fumeclear air extractor
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This part is designed to take the exhaust from the xTool S1 and feed the fumes into a Fumeclear FC-2003. This silcone adapter works but I wanted to short the run for the exhaust, so this part allows for that.
This may work for other Fumeclear parts or can easily be remixed to fit other adapters.
The S1 side of the adapter has a 90mm inside diameter. The Fumeclear side has a 66mm outside diameter.
This was designed with TPU in mind as the material and works well with that.
xTool S1 - https://www.xtool.com/products/xtool-s1-laser-cutter
The Fumeclear extractor - https://www.fumeclear.com/products/fumeclear%C2%AE-fc-2003-fume-extractor-194cfm
Enjoy!
