PFAF Passport sewing machine tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is simple tray for PFAF Passport 3.0 but should also fit also PFAF 2.0 f3d and step files included
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is very simple tray to fit PFAF Passport 3.0 (should fit also 2.0) sewing machine.
Warning It is longer that typical printer can print. It is 30cm long. If you need smaller, feel free to import in fusion 360. File is included. Or you can cut and glue it.
Feel free to remix and improve. f3d and step files are included.
This is not a mechanical part so it doesn't matter settings like infill, etc. but you need to have a big print bed at least 30cm (maybe you can rotate it diagonaly and use smaller bed)
I printed it with:
- printer: custom Hevort CoreXY 300x290
- skirt: 0 (as it is so big)
- walls: 3
- layer 0.2
- infill 15% grid
- White PLA