HX711 load cell enclosure with o-ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an enclosure for an HX711 load cell that consists of a top and bottom part.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 1024
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this enclosure so I can build a bee hive scale with four HX711 load cells on each corner. It's made to be used outside and can be sealed with a fitting o-ring. Also it's supposed to be screwed to a top and bottom frame, so that the top part is always level. The cables of the cell are tunneled to the bottom and protected by a small canal.
Make sure you glue a washer with the right size to the holder in the top part as that will be the counterpart for the load cell's tip and needs to be strong and stiff so the weight gets transferred correctly to the cell.
This was made in FreeCAD. Let me know if you need the open files. It can be printed without supports on a PRUSA printer and I used 100% infill.